Lincoln Electric K1780-1 Manual do Utilizador

Power Feed 10 RoboticK1780-1OPERATOR’S MANUALIM689-AMay, 2007Safety Depends on YouLincoln arc welding and cuttingequipment is designed and builtwith s

A-3INSTALLATION POWER FEED 10 / RA-3When using an inverter type power source, Use thelargest welding (electrode and work) cables that

A-4INSTALLATION POWER FEED 10 / RA-4CONTROL CABLE SPECIFICATIONSIt is recommended that genuine Lincoln control cablesbe used at all times. Li

A-5INSTALLATION POWER FEED 10 / RA-5CHANGING THE WIRE DRIVE RATIOELECTRIC SHOCK can kill.• Turn off power to the power sourceat the disconnect swit

A-6INSTALLATION POWER FEED 10 / RA-6WIRE FEED DRIVE ROLL KITSNOTE: The maximum rated solid and cored wiresizes and selected drive ratios are s

A-7INSTALLATION POWER FEED 10 / RA-7GUN RECEIVER BUSHINGS ANDADAPTERSThe Power Feed wire feeders are equipped with facto-ry installed K1500-2 gun

A-8INSTALLATION POWER FEED 10 / RA-83. If the only result is drive roll slippage, disengage thegun, pull the gun cable forward about 6" (150 mm

GENERAL DESCRIPTIONThe Power Feed 10 Robotic is a high performance,digitally controlled, modular wire feeder. Properlyequipped, it can

PLATFORM COMMONALITIES• Power Feed 10 series Feedhead.• CGA gas connections.• Quick connect water connections.• Works with all PowerWave ArcLink

D-1MAINTENANCED-1POWER FEED 10 / RAVOIDING WIRE FEEDING PROBLEMSWire feeding problems can be avoided by observingthe following gun handling

E-1TROUBLESHOOTINGE-1POWER FEED 10 / RIf for any reason you do not understand the test procedures or are unable to perform the tests/repairs sa

FOR ENGINEpowered equipment.1.a. Turn the engine off before troubleshooting and maintenancework unless the maintenance work requires it to be running.

E-2TROUBLESHOOTINGE-2POWER FEED 10 / RObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the tes

E-3TROUBLESHOOTINGE-3POWER FEED 10 / RObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the tes

E-4TROUBLESHOOTINGE-4POWER FEED 10 / RObserve all Safety Guidelines detailed throughout this manualIf for any reason you do not understand the tes

F-1DIAGRAMSF-1POWER FEED 10 / RNOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual. The speci

F-2DIAGRAMSF-2POWER FEED 10 / RPOWER FEED 10 / R DIMENSION PRINT12.233.541.771.201.121.9711.9810.237.75.752.00.44. .12/2000L1157911.982.751.47 1.221.4

NOTES POWER FEED 10 / R

NOTES POWER FEED 10 / R

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicREAD AND UNDERSTAND THE MANUFACTURER’S INSTRUC

WARNINGAVISO DEPRECAUCIONATTENTIONWARNUNGATENÇÃOSpanishFrenchGermanPortugueseJapaneseChineseKoreanArabicLEIA E COMPREENDA AS INSTRUÇÕES DO FABRICANTE

• Sales and Service through Subsidiaries and Distributors Worldwide •Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB

iiSAFETYiiPOWER FEED 10 / RARC RAYS can burn.4.a. Use a shield with the proper filter and coverplates to protect your eyes from sparks andthe rays of

iiiSAFETYiiiPOWER FEED 10 / RFOR ELECTRICALLYpowered equipment.8.a. Turn off input power using the disconnectswitch at the fuse box before working ont

ivSAFETYivPRÉCAUTIONS DE SÛRETÉPour votre propre protection lire et observer toutes les instructionset les précautions de sûreté specifiques qui parra

vvTThhaannkk YYoouufor selecting a QUALITY product by Lincoln Electric. We want youto take pride in operating this Lincoln Electric Company p

vi TABLE OF CONTENTSPageInstallation ...Section AT

POWER FEED 10 / RA-1INSTALLATION A-1TECHNICAL SPECIFICATIONS – Power Feed 10 Robotic-K1780-1WIRE DRIVE OR WIRE DRIVE SECTION OF FEEDERSPEC.# TYPE L

A-2INSTALLATION POWER FEED 10 / RA-2SAFETY PRECAUTIONSMOUNTING OF THE PF10/RMount the wire drive unit by means of the 4 holes inthe bottom o